Prepare for a bunch of debris to spill out as soon as you press the button. If you haven’t positioned the bin over a bag, you may end up with a mess in your home to vacuum up again! Shake the vacuum around to knock loose as much dust as you can. It will make the rest of the cleaning process much easier.
Empty out any dust still left in the bin. Turn it over inside a garbage bag and shake out as much as you can.
Dishwashers are too hot and rough for the bin, so don’t put it in there. Always clean it out by hand. If the bin isn’t very dirty, you may be able to wipe it clean with a dry cloth. A damp cloth will help you pick up stubborn debris, however.
To keep your vacuum in working order, make sure the bin is completely dry before putting it back on the cyclone. Don’t risk water damage when wiping it dry is such a simple process.
If the combination brush isn’t available, try using another brush. Choose something soft to avoid scratching the plastic. Try using another vacuum brush, a nylon scrub brush, or even an old toothbrush. Use only a dry brush to avoid getting any moisture inside the cyclone and the motor.
Make sure the bin is completely dry before reinstalling it or else moisture could get into the vacuum!
Before you start washing the filter, check it for damage. If it looks worn out, you’re better off replacing it. Purchase a new filter online or look for them at nearby general or hardware stores.
If you’re unsure whether or not your vacuum has a second filter, check the owner’s manual. It will show you where the filters are as well as Dyson’s cleaning recommendations for them.
If you’re cleaning a cap filter, rinse it off repeatedly under running water. Dump water out of the cap until it looks clear. The filters can’t be put in a dishwasher or washing machine. It’s too delicate. Wash it by hand to ensure they lasts longer.
Let the filter dry naturally in open air. If you try to speed up the process, such as by using a dryer, microwave, or flame, you will end up damaging it.
Dyson recommends cleaning the filter at least once a month. You may need to wash them more frequently if your vacuum doesn’t seem to be working as well as you like. Check the filters after vacuuming up heavy amounts of debris.
If you don’t have a coin handy, try using a screwdriver or a similar object. Use something blunt but sturdy to avoid problems.
Wiggling the bar can help free it if it gets stuck. Rotate it so the bristles don’t get caught on the casing.
Not all models of the V6 have a second bar, so don’t worry if you can’t find one. Instead, look deeper into the floor tool for any loose debris that needs to be removed by hand.
If the brush bars suddenly stop turning when you’re using the vacuum, hidden debris could be the cause. Most V6s have a little pocket in the back of the floor tool where hair gets trapped and eventually blocks the brush bars.
If the brush bars aren’t very dirty, you can skip washing them. Remove any noticeable debris by hand, then put them back in the vacuum.
Dryers and other heat sources aren’t safe to use. Let the bars dry on their own.
Clean the brush bars about once a month to keep them turning. If you pick up a lot of hair, you may need to clean them out more often to prevent clogs from forming.
