Avoid vacuuming stone and ceramic tiled floors because the vacuum could cause surface damage. It also won’t work as well on uneven (tiled) surfaces. Vinyl floors, in particular, can be damaged by the spinning beater bar, so be sure to turn it off. [2] X Research source If you don’t have a large vacuum, store a small hand-held vacuum in your bathroom cabinet to make cleaning up hair more convenient.
Clean the roller after each use with soap and water. While a sticky roller can pick up hair off of any surface, it won’t work as well on uneven surfaces like stone and tiled floors. You can purchase a large sticky roller at any hardware store or supermarket with a home cleaning section.
Rubber brooms are more effective at picking up hair than a regular broom and can be used on vinyl, hardwood, stone, ceramic, and linoleum floors. For uneven stone floors and ceramic tiled floors with lots of grout lines, use a bristled rubber broom. You can buy a squeegee or bristled rubber broom at any home and hardware store.
Damp-mopping a floor that hasn’t been dry-mopped will only push the hair around and make it stick to the floor. Dry-mopping can grab hair from most floor surfaces, but it may not work as well on uneven natural stone or tiled floors with lots of grout lines.
You can also use this on the floor or bathroom rugs, but it might take a while! A small sticky roller won’t work on uneven surfaces like natural stone or ceramic tiles with a lot of grout lines.
Dry dust wipes pick up more hair than a paper towel or regular towel would. Microfiber towels and dust wipes are safe to use on any type of surface.
Avoid anything that’s super acidic or alkaline because these can corrode the surface of laminate countertops and cause discoloration. You may need to stop and pick off any hair from the surface of the towel while you’re cleaning. Mild cleansers are safe to use on most surfaces except wood because it’s extremely porous and any moisture can cause discoloration or weaken the wood.
Don’t use anything with lemon juice or other acids (like vinegar) on granite or marble countertops because it will eat through the sealant that protects the surface from stains and etches. Dish soap and water can be used on any other type of surface as long as you don’t use an abrasive sponge like steel wool or the backside of kitchen sponges because these can scratch the surface of granite, marble, stone, wood, porcelain, fiberglass, and ceramic countertops.
Avoid using cleansers containing high-acidity ingredients like vinegar, bleach, and ammonia because they can damage the stone. Stone-safe cleansers are safe to use on any other surface, even painted wood.
This will only work on any surface if the hair and surface are dry. Any moisture will make the strands stick to the surface. You can also put a hairband or rubber band around your hand (so it lies across your palm) and go over the surface that way. The band acts as a lip for the hair to stick to. You can do this with ceramic, fiberglass, or porcelain tubs, showers, and sinks.
You can also use a soft, non-scratch sponge to gather hair out of curved sinks or uneven stone surfaces.
Avoid using any cleaners containing chlorine or bleach because these could damage the surface of the glass sink or shower door.
If the sink or tub is wet, some of the hair will stick to the sponge and some will stay on the surface. Go over it again with a dry paper towel to get any stuck-on strands.
For extra cleaning power, sprinkle some baking soda onto the surface before you wipe it down. The combination of baking soda and vinegar creates a fizzy paste that will loosen any stuck-on soap scum or mildew. You can use vinegar (and baking soda, if you choose) on all surfaces except granite, marble, wood, and natural stone.
